Seating Distance

Guides · 1 of 5

How big should your projector screen be?

Size a screen in five checks: where you sit, the screen's shape, how high it hangs, how bright it will be, and whether your projector's resolution keeps up.

  1. 1. Start from the seat
  2. 2. 16:9 or 2.35:1
  3. 3. Check the height
  4. 4. Check the brightness
  5. 5. Check the resolution
  6. Checklist
  7. What to buy
  8. Sources

Most people pick a projector screen by the wall: whatever fits. The better order is the other way round. Your seat sets the size, and the wall, the ceiling and the projector then have to agree with it. Each check below uses the same formulas as our calculator.

1Start from the seat

Measure from where your eyes will be when you're seated to the wall the screen goes on. Measure from your head, not the front edge of the seat; reclined seats put your eyes further back than you'd think. A laser measure makes this a one-person job.

Then read across to the screen size for the viewing style you want. Cinematic (36°) is a good default for a dedicated room. Casual (30°) suits a room that's also used for TV and conversation; Immersive (40°) is for people who want the screen to fill their view.

Seat distance16:9 screen2.35:1 screen
Casual
30°
Cinematic
36°
Immersive
40°
Casual
30°
Cinematic
36°
Immersive
40°
10 ft74″89″100″70″85″95″
11 ft81″98″110″77″93″104″
12 ft89″107″120″84″102″114″
13 ft96″116″130″91″110″123″
14 ft103″125″140″98″119″133″
15 ft111″134″150″105″127″142″
16 ft118″143″160″112″136″152″

Screen diagonals for each seat distance. More distances in the full charts.

Two rows of seats? Size for the front row at Immersive or Cinematic, then check that the back row still gets at least the Casual 30°. If it doesn't, the screen is too small for the back row or the rows are too far apart.

2Choose 16:9 or 2.35:1

A 16:9 screen matches TV shows, sport, games and streaming. Many films are wider, around 2.35:1 or 2.39:1, and show with black bars above and below on a 16:9 screen.

A 2.35:1 screen flips that: films fill it, and 16:9 content shows with bars at the sides. Owners often size it for constant image height, so 16:9 and scope images are the same height and films are simply wider. A 120″ 16:9 screen is 58.8″ tall; a 2.35:1 screen of the same height is about 150″ diagonal.

Choose 2.35:1 if most of what you watch is films and your wall is wide enough. Choose 16:9 if the screen also does TV, sport or gaming, or if the wall limits the width.

One catch with 2.35:1: a 16:9 projector without an anamorphic lens has to zoom the image to fill the width, which leaves about a quarter of its pixel rows unused. The calculator's pixel check accounts for this.

3Check the height

A screen that's the right width can still be uncomfortable if it hangs too high. SMPTE's cinema design guideline EG-18 kept the angle from the front-row viewer's eye up to the top of the image at or under 35°, and preferred about 15° to the middle of the screen. (SMPTE withdrew EG-18 in 2003, but its geometry is still the common reference.)

Angle to top of image = atan((top of image − eye height) / distance)

Example: 120″ 16:9 at the Cinematic seat
Image height        58.8 in
Seat distance       160.9 in   (13 ft 5 in)
Eye height          40 in   // typical seated; measure yours
Bottom of image     24 in   →  top at 82.8 in
Angle to top        atan(42.8 / 160.9) = 14.9°
Angle to center     4.8°

That example is comfortable. Problems usually show up in rooms where the screen goes above a fireplace or a TV, or where the front row sits close to a tall screen.

Also check the wall: you need room for left and right speakers beside the screen. If you don't have it, an acoustically transparent screen lets you put them behind.

4Check the brightness

A bigger screen spreads the same light over more area, so every size step makes the picture dimmer. Screen brightness is measured in foot-lamberts (fL):

fL = projector lumens × screen gain / screen area (sq ft)
Lumens needed = target fL × screen area / screen gain

Example: 2,000 lumens on a 120″ 16:9 screen, gain 1.0
Area  = 42.7 sq ft
fL    = 2,000 × 1.0 / 42.7 = 46.8 fL

The cinema reference is SMPTE 196M: 16 fL for a darkened room, with 12 to 22 fL allowed. Many home viewers prefer a brighter image, and rooms with any light in them need much more.

ScreenArea
sq ft
Lumens for 16 fL
dark room
Lumens for 30 fL
brighter image
100″ 16:929.7475890
110″ 16:935.95741,077
120″ 16:942.76841,282
135″ 16:954.18651,622
150″ 16:966.81,0682,003
135″ 2.35:145.67301,368
150″ 2.35:156.39011,689
165″ 2.35:168.11,0902,044

Gain 1.0. For other screens, divide by the gain: a 1.3-gain screen needs about 23% fewer lumens.

These are lumens actually reaching the screen once the projector is set up for accurate color. Manufacturers' ratings are usually measured in the brightest mode, and lamps and lasers dim with age, so choose a projector with plenty of headroom over these numbers.

Gain isn't free. Higher-gain screens send more light straight back toward the center seats and less to the sides. A matte white screen around gain 1.0 to 1.3 is the safe choice for a dark room with seats spread across it.

5Check the resolution

Big screens show pixels sooner. On the 120″ 16:9 example, a viewer with 20/20 vision can make out 1080p pixels closer than 15 ft 7 in, which includes the Cinematic seat at 13 ft 5 in. 4K pixels blend from 7 ft 10 in on.

This holds at every 16:9 size: the Cinematic and Immersive seats are close enough to resolve 1080p pixels, and all three viewing styles are far enough back that 4K looks smooth. For screens of 100″ and up, 4K is the resolution that matches these viewing angles. 8K only adds visible detail closer than about 0.78 times the diagonal.

Checklist

  1. Measure eye-to-screen distance from your main seat.
  2. Pick a viewing style and read off the diagonal.
  3. Choose 16:9 or 2.35:1, and confirm the width fits with room for speakers.
  4. Check the angle to the top of the image is under 35°.
  5. Work out the lumens you need, then add headroom.
  6. Use 4K for screens of 100″ and up.

What to buy

Product picks coming soon. Below is what to look for in each category. When we add specific products, some links will be affiliate links, and this section will say so. We don't accept payment for placement, and product notes will describe published specifications, not hands-on reviews.

Laser distance measure

For step 1. Measures to a wall in one press, accurate to a fraction of an inch.

  • Range of at least 50 ft
  • Reads in feet and inches and in metres

Fixed-frame screen, matte white

The default for a dark, dedicated room.

  • Gain between 1.0 and 1.3, with the gain published
  • Available in the diagonal you sized above, in 16:9 or 2.35:1
  • Tensioned surface with a black velvet border

Acoustically transparent screen

For walls without room for speakers beside the screen.

  • Woven or perforated material rated for speakers behind it
  • Published gain, usually a little under 1.0, so budget extra lumens

4K projector

Matched to the lumens in step 4.

  • Native or pixel-shifted 4K, stated clearly in the specs
  • Calibrated brightness well above the lumens you need
  • Lens zoom and shift that fit your room; throw distance to come in a later calculator

Sources